CNC Kit – BF20L – Complete

CNC Kit – BF20L – Complete


Calculate Postage

 Postage Cost : $0.00

OPTIMUM Complete CNC Kit to suit BF20 / BF20L Milling Machine

Genuine OPTIMUM Factory Conversion Kit
Complete Recirculating Ball Screw Kit for X Y Z Axis
3 x CNC Control Cards for X Y Z Axis
1 x CNC Controller VI CPU – CNC Software not included
1 x Reference Switch Kit
1 x Add On Kit for all 3 Axis to suit BF20 Milling Machine – X Y Z Axis step motor drive

Availability: Out of stock SKU: MILL-BF20CNC-KIT
  • Description
  • Additional information
  • Reviews (2)


CNC kit consisting of:

  • 1 x controller VI
  • 3 x control cards 40 V
  • 1 x reference switch set
  • 1 x add-on kit MT F20DP (without software)
  • 1x Installation Manual
  • 1 x Complete Set of Recirculating Ball Screws for X,Y and Z axis
  • 2,75 Nm Torque on the spindle Y-axis

Travel speed

  • max. 24 mm/sec. with recirculating ball screw*

*Speeds have been determined by NC-Drive and current BF20

CNC controller VI

  • With 6 card slots · (3 x cards supplied)
  • 4 potential-free relay outputs
  • Connection 230 V ~50 Hz 300 VA
  • Dimensions L x W x H: 540 x 275 x 125 mm

CNC control card x 3 (Installed in Controller IV)

  • X-, Y- and Z axis
  • Pluggable CNC control card with largely dimensioned coolant body
  • Adjustable current and holding torque

Add-on kit

  • Three step motors 2.2 Nm, 3A (bipolar)
  • Three assembly housings incl. lids
  • Three driving belts
  • Six pulleys
  • Two spacers
  • 7 meters screening cable
  • Screw kit

Complete kit recirculating ball screw BF20/L Vario

  • X, Y and Z Axis recirculating ball screws

Complete Reference Switch Set

  • X Y and Z Axis

*Please note Stepper Motors need to be installed and wired by licensed electrician to match pin pattern for IV Controller and meet Australian Electrical Standards
**Software not included. Redfox suggests mach4 or MegaNC (if you can read German)

***PLEASE NOTE this item is by special order only with approx. 6 month delivery and 25% deposit required

Additional information

Weight 45 kg
Dimensions 60 × 60 × 50 cm

2 reviews for CNC Kit – BF20L – Complete

  1. 5 out of 5

    I love my BF20L with the factory fitted CNC! I am running Mach4 as suggested and I couldn’t be happier. Thanks Redfox for all your help and advice.

  2. Great bit of kit! Have nice day ! 🙂

Add a review