METEX by OPTIMUM BF20L with 3 Axis CNC Milling Machine

METEX by OPTIMUM BF20L with 3 Axis CNC Milling Machine


Calculate Postage

 Postage Cost : $0.00

Another Quality METEX product made by OPTIMUM!
Get the best of both worlds METEX is the trusted Australian brand made for Australian standards and conditions made by OPTIMUM with their German Precision design and Quality control.

METEX by OPTIMUM BF20L Milling Machine with Factory Ready 3 Axis CNC

Availability: Out of stock SKU: MILL-BF20L-CNC
  • Description
  • Additional information
  • Reviews (0)



  • Genuine Optimum IV CNC Controller
  • 3x Genuine Optimum CNC Control Cards
  • 3x Genuine Optimum 2.2Nm, 3A (bipolar) Stepper Motors*
  • 3x Axis Genuine Optimum Factory Installed Ball screws
  • 7m Shielded cable

Wide range of applications
Extra Long Table and Travel
With dynamic infinitely variable drive from 90 to 3000 rpm
Milling head can be rotated by 90° left and right and thus allows milling and drilling operation in every angle position
Upright laterally adjustable for further application
Work Light
Micro Feed Adjustment
Digital Spindle Speed Readout
Digital Sleeve Travel Readout, Precision of reading – 0.01mm
Simple and clear operation
User-friendly automatic switch according to IP 54 with low-voltage release
Scale collars for all axis are adjustable
Spindle Taper MT3
Clearance freely adjustable dovetail slide ways on all 3 axis
Expansion Bellows Protection on Dovetail Column
Unrestricted milling access through clampable guide ways
Produced according to toolmaker´s precision with test certificate

*Please note Stepper Motors need to be installed and wired by licensed electrician to match pin pattern for IV Controller and meet Australian Electrical Standards
**Software not included. Redfox suggests mach4 or MegaNC (if you can read German)

***PLEASE NOTE this item is by special order only with approx. 6 month delivery and 25% deposit required

Additional information

Weight 135 kg
Dimensions 90 × 80 × 70 cm
Drilling capacity (max.)

Ø 20 mm

Milling capacity of cutter head (max.)

Ø 63 mm

Milling capacity of end mill cutter (max.)

Ø 20 mm

Working range


Spindle holding fixture

MT3 / M 10

Spindle speeds (variable) 90


Sleeve travel


T-slot size 12mm

distance 63mm

Table size (L x W)

700mm x 180mm

Drill head swivel angle


Travel Z

axis 380mm (without bellow)

Travel Y

axis 175mm

Travel X

axis 480mm

Motor power

240 V / 50 Hz 850 W (1.14 HP)

Dimensions (L x W x H)

670 x 550 x 860

Net weight



There are no reviews yet.

Be the first to review “METEX by OPTIMUM BF20L with 3 Axis CNC Milling Machine”

You may also like…